Two Pebbles Studs (Gem Set)
Simple stone set “Pebble” stud earrings, suitable to be worn every day.
Each “pebble” will be 3-7mm across depending on the amount of metal supplied, (one being slightly larger than the other).
Made by hand from your old silver, gold or platinum jewellery.
In order to have this piece made I will need you to send me the following approximate amounts of your old jewellery.
GEMSTONES: 2-4 round gemstones, no bigger than 2mm in diameter.
SILVER: 4-5 grams
GOLD: (9ct or a mixture of 9/18/22ct): 6 grams
GOLD: (18/22ct): 7 grams
PLATINUM: 8 grams
If you are sending two colours of metal, please select the lowest carat. eg: for 18ct yellow gold with silver, please select ‘silver.’
(Gold carats (9/18/22) can be mixed together, but please be aware that the finished piece will be hallmarked at the lowest carat value.)
(Earring backs will be “bought in” as it’s just not cost effective to make these. For platinum, 18/22ct gold or a mixture of the two, this will be a secure “screw on” back. Additional metal has been added to the amount required for making to allow for the cost of the earring backs)
Simple stone set “Pebble” stud earrings, suitable to be worn every day.
Each “pebble” will be 3-7mm across depending on the amount of metal supplied, (one being slightly larger than the other).
Made by hand from your old silver, gold or platinum jewellery.
In order to have this piece made I will need you to send me the following approximate amounts of your old jewellery.
GEMSTONES: 2-4 round gemstones, no bigger than 2mm in diameter.
SILVER: 4-5 grams
GOLD: (9ct or a mixture of 9/18/22ct): 6 grams
GOLD: (18/22ct): 7 grams
PLATINUM: 8 grams
If you are sending two colours of metal, please select the lowest carat. eg: for 18ct yellow gold with silver, please select ‘silver.’
(Gold carats (9/18/22) can be mixed together, but please be aware that the finished piece will be hallmarked at the lowest carat value.)
(Earring backs will be “bought in” as it’s just not cost effective to make these. For platinum, 18/22ct gold or a mixture of the two, this will be a secure “screw on” back. Additional metal has been added to the amount required for making to allow for the cost of the earring backs)
Simple stone set “Pebble” stud earrings, suitable to be worn every day.
Each “pebble” will be 3-7mm across depending on the amount of metal supplied, (one being slightly larger than the other).
Made by hand from your old silver, gold or platinum jewellery.
In order to have this piece made I will need you to send me the following approximate amounts of your old jewellery.
GEMSTONES: 2-4 round gemstones, no bigger than 2mm in diameter.
SILVER: 4-5 grams
GOLD: (9ct or a mixture of 9/18/22ct): 6 grams
GOLD: (18/22ct): 7 grams
PLATINUM: 8 grams
If you are sending two colours of metal, please select the lowest carat. eg: for 18ct yellow gold with silver, please select ‘silver.’
(Gold carats (9/18/22) can be mixed together, but please be aware that the finished piece will be hallmarked at the lowest carat value.)
(Earring backs will be “bought in” as it’s just not cost effective to make these. For platinum, 18/22ct gold or a mixture of the two, this will be a secure “screw on” back. Additional metal has been added to the amount required for making to allow for the cost of the earring backs)
Please note - ideally, the metal that you are sending me should be hallmarked, but sometimes the hallmark may be too small to read, have worn off, or it maybe didn’t have one in the first place. I can only recycle solid silver, gold or platinum, so if you’re not sure, please contact me first to check. If you send extra than is needed, any thats not useable, or needed will be returned to you with your new piece of jewellery.
If your old jewellery contains gemstones, please do your best to make an allowance for this when weighing it. If the piece you are ordering doesn’t have gemstones, any that are removed from your old jewellery will be returned to you.
* The final weight of the piece that you receive will be less than the amount of metal supplied as some is lost in the melting down process and some during engraving and finishing.